If you’re looking for a relatively simple sewing project that will result in a personalized and unique product, look no further than this guide to making your own crib bumper pads. Bumper pads are not only a useful nursery item, but they also provide an opportunity to add a splash of color or pattern to your baby’s crib. Best of all, making your own bumper pads is a fraction of the cost of purchasing them new.
This guide will walk you through the supplies you’ll need and the steps to take in order to create your own bumper pads. With a little bit of time and effort, you’ll have a beautiful and one-of-a-kind set of bumper pads for your baby’s crib.
Decorating a nursery is an exciting experience for parents-to-be. One essential item for your baby’s crib is a bumper pad, which not only adds style but also provides a protective barrier. Making crib bumper pads yourself allows you to customize them to match your nursery decor and ensure they meet safety standards. In this article, we will provide you with a step-by-step DIY guide on how to make crib bumper pads. Let’s get started!
1. You will need the following materials:
2. 2 yards of 44-45″ wide quilt-weight cotton fabric
3. 1 1/2 yards of polyester batting
4. 1/2 yard of coordinating ribbon
5. 6 ties (optional)
6. Basic sewing supplies
1. Cut two long strips from the cotton fabric, one for the top and one for the bottom of the bumper. The top strip should be about 8″ longer than the bottom strip.
2. Cut four shorter strips from the batting. Two of these should be about 8″ shorter than the top and bottom fabric strips, and the other two should be about 4″ shorter.
3. Sew the top and bottom fabric strips together, right sides together, using a 1/2″ seam allowance. Sew the batting strips to the top and bottom strips in the same manner.
4. Fold the fabric in half, wrong sides together, and press.
5. Topstitch around the entire perimeter of the fabric, using a 1/8″ seam allowance.
6. If desired, sew ties to the corners of the bumper.
7. That’s it! Your bumper is now ready to use.
1. You will need the following materials:
You’ll need a lot of material to make your own crib bumper pads! Here’s a list of what you’ll need to get started:
-Tape measure
-Ruler or a cutting mat
-Scissors
-Pins
-Thread
-Sewing machine
-Fabric (You’ll need about 2-3 yards, depending on the size of your crib)
-Stuffing (You can use polyester fiberfill, quilt batting, or even old pillows)
-Ribbons or ties (optional)
Now that you have your materials, you’re ready to get started!
2. 2 yards of 44-45″ wide quilt-weight cotton fabric
If you are planning to make your own crib bumper pads, you will need to purchase quilt-weight cotton fabric. You will need two yards of fabric that is 44-45 inches wide. When choosing your fabric, it is important to select a cotton fabric that is machine washable and dryable.
Once you have chosen your fabric, you will need to cut it into four rectangular pieces. Each piece should measure 22-23 inches wide by 36-37 inches long. Once you have cut your fabric, you will need to sew the pieces together.
To sew the fabric pieces together, you will need to use a sewing machine. Start by sewing the two long sides of the fabric together. Then, sew the two short sides of the fabric together. When you are finished sewing, you should have one long rectangular piece of fabric.
Next, you will need to create the casing for the ties. To do this, you will need to fold the long side of the fabric over by 1/2 inch. Then, fold it over again by 1/2 inch. Sew the fabric along the folded edge to create the casing.
After you have created the casing, you will need to insert the ties. Cut eight pieces of ribbon or fabric that are each 24 inches long. Fold the fabric in half, and insert the folded end into the casing. Pin the fabric in place, and then sew the fabric along the edge of the casing.
Your crib bumper pads are now finished! You can tie them onto the crib using the ties that you inserted into the casing.
3. 1 1/2 yards of polyester batting
Once you have decided on the dimensions of your crib bumper pads, cut two rectangles out of the polyester batting. The rectangles should be the same size as the width of your crib and the height of your crib plus six inches. Fold the rectangles in half, so that they are now the size of your crib. Pin the two pieces of batting together, making sure to leave an opening at the top.
Sew the two pieces of batting together, using a sewing machine. Start at the bottom and sew up the side, across the top, and then down the other side. Leave the opening at the top unsewn. Trim the excess batting from the seam.
Turn the bumper pads right side out through the opening at the top. Push the corners out so that they are nice and sharp. Sew the opening at the top closed.
Now, you will need to create a casing for the ties. To do this, sew a seam around the perimeter of the bumper pads, 1/2 inch from the edge. Leave a four-inch opening at one of the short sides.
Thread a long piece of ribbon through the casing, using a safety pin. Start at the opening and thread the ribbon all the way around, making sure to go through the casing at the corners. When you get back to the opening, knot the two ends of the ribbon together. Trim the excess ribbon.
Your crib bumper pads are now complete!
4. 1/2 yard of coordinating ribbon
If you’re planning on making your own crib bumper pads, you’ll need to gather a few supplies. One of those supplies is half a yard of coordinating ribbon.
Ribbon can be found at most fabric or craft stores. When choosing ribbon, make sure to get a coordinating color that will complement the fabric you’ve chosen for your bumper pads.
Once you have your half yard of ribbon, cut it into 12 inch lengths. You will need four lengths of ribbon for each side of the crib bumper.
After you’ve cut your ribbon, use a hot glue gun to attach the ribbon lengths to the top and bottom of the crib bumper. Make sure to space the ribbon out evenly.
And that’s it! You now know how to make your own crib bumper pads.
5. 6 ties (optional) how to make crib bumper pads
Assuming you want step-by-step instructions for adding ties to crib bumper pads:
If you want to add ties to your crib bumper pads, you’ll need to follow these steps:
1. Decide how many ties you want to add. You’ll need 6 pieces of fabric that are each about 18″ long.
2. Cut your fabric into strips.
3. Fold the fabric in half lengthwise and then sew a seam down the long side.
4. Turn the fabric right side out and press it flat.
5. Pin the fabric strips to the bumper pads, making sure that the seams are facing inwards.
6. Sew the strips onto the bumper pads, using a decorative stitch if desired.
7. Trim the excess fabric from the ties.
8. That’s it! Your bumper pads are now ready to use.
6. Basic sewing supplies
You will need some basic sewing supplies to make your own crib bumper pads. You will need a sewing machine, thread, fabric, scissors, and a ruler or measuring tape. You may also want to use some kind of interfacing to give the bumper pads some structure.
You will need to measure the circumference of your crib to determine how much fabric you will need. Cut the fabric to the appropriate size, leaving a few inches extra to account for seams. Start by sewing the two long sides of the fabric together, then move on to the two short sides. Once all four sides are sewn together, you will need to turn the fabric right side out and iron it flat. Next, sew a seam around the entire edge of the fabric to create a finished look.
Now it’s time to start filling the bumper pads with stuffing. You can use any kind of stuffing you like, but make sure it is firm enough that it will not shift around too much. Once the bumper pads are filled, simply sew the opening closed.
Now they are ready to use! Place them around the edge of the crib and you’re all set.
1. Cut two long strips from the cotton fabric, one for the top and one for the bottom of the bumper. The top strip should be about 8″ longer than the bottom strip.
If you’re looking for a low cost and easy way to make your own crib bumper pads, this DIY guide is for you. All you need is some cotton fabric and a bit of time, and you can create custom bumper pads that will add a touch of style to your nursery.
To get started, cut two long strips from the cotton fabric, one for the top and one for the bottom of the bumper. The top strip should be about 8″ longer than the bottom strip. Then, fold the fabric in half lengthwise and sew the long sides together, using a ¼” seam allowance. Next, Turn the fabric right side out and press the seam flat.
Now it’s time to attach the fabric to the crib. Start by threading the ties through the top strip of fabric, spacing them evenly. Then, tie the strips to the outside rails of the crib, making sure the fabric is pulled taut. Finally, do the same with the bottom strip of fabric.
That’s it! Your DIY crib bumper pads are now complete.
Making your own crib bumper pads is a great way to save money and get exactly what you want. Plus, it’s not as difficult as you might think. This DIY guide will show you how to make your own bumper pads, step-by-step. With a little time and effort, you can create a beautiful, custom set of bumper pads for your baby’s crib.
